Melett warns of perils of foreign objects in turbochargers

Date: Monday 02 October 2023

---

Turbocharger specialist Melett has warned technicians to be wary of the effects of foreign objects on the integrity of turbocharger systems.

A foreign object refers to anything that enters the turbocharger through the air or exhaust inlets, and when debris enters the turbocharger, its performance will be affected, potentially resulting in considerable damage.

Tom Wright, product manager at Melett, said:

“It’s critical that technicians pay special attention to the condition of other components within the vehicle to mitigate the risks posed to the turbocharger.

“There are various scenarios that can result in contaminants in the turbocharger air supply, all of which can have devastating effects on the system’s longevity. This includes previous turbocharger failures leaving remnants in the system, debris from engine components or objects left within intakes during regular servicing.”

Technicians can potentially diagnose a turbocharger with foreign object damage if a system is suffering from rattling or grinding noises during operation, and drivers experience loss of engine power.

Causes of foreign object intake can also include faulty or damaged turbo hoses, which inadvertently cause small particles to enter through any gaps in the system.

A turbocharger repair specialist will be able to diagnose foreign object damage if there are visible marks on the compressor or turbine blade, or pitting marks around the compressor inlet and nozzle ring assembly vanes.

If the turbine or compressor blade is found to be damaged, the turbocharger should stop being used immediately, as the rotor balance will be affected, and this could impact its service life.

"To prevent turbo failure from foreign object damage, we recommend that technicians always replace or fully clean intake pipes and check for debris before fitting a replacement turbo,” Wright said.

All air hoses should be free from contaminants and blockages. Hoses should also be checked regularly as part of routine turbocharger servicing.

“Technicians should always use the correct air filter suitable for the specific vehicle model, and regularly replace it according to the manufacturer's recommendations. As with intake pipes and air hoses, following a turbocharger failure, the filter and surrounding intakes should be cleaned to eliminate any debris or fragments that could harm the new turbocharger,” Wright adds.

If any turbocharger issues are suspected, Melett’s network of highly qualified turbocharger repair specialists can provide a full turbo inspection and diagnosis service to help identify the root cause of failure and prevent further issues.

For further information on Melett turbocharger systems, part fitment, technical guides and troubleshooting, visit: https://www.melett.com/ 

---